Storage 105
If equipped, the cargo cover can be
used to cover items in the
cargo area.
Install the Cargo Cover
1. Hold the cartridge so that the
retracted cargo cover faces the
rear of the vehicle.
2. Align the cartridge over the
slots on the trim panels of the
vehicle.
3. Place one end of the cartridge
into the slot and then compress
to fit the other end into the
remaining slot.
4. Unroll the cargo cover toward
the rear of the vehicle. The
cargo cover can be half open
or fully open.
5. Insert the cargo cover pins into
the channels on both sides.
Remove the Cargo Cover
Remove the cargo cover pins from
the channels and let the cover
retract. Compress the ends of the
cartridge to remove it from the slots.
To Next Page
Loading...
