14
EN
Base unit
Before cleaning, be sure to remove the USB cable from the base unit.
Periodically clean the base unit, air inlet, and air outlet.
1. Before cleaning, be sure to remove the
USB cable from the base unit.
2. Remove dust from the air inlet and air
outlet using a vacuum cleaner or other
tool. Alternatively, wipe it using a soft
cloth.
3. After turning the top cover to the right, lift
it up, remove the lter from the unit back
face, and remove the dust inside the base
unit with a cotton swab or similar tool.
• The top cover does not come off.
• If it does end up coming off, refer to
the “If the Top Cover Comes Off”
section and install it.
To Next Page
Loading...
