Caen A 1735 - Channel Characteristics Table

Document type:
Title:
Revision date:
Revision:
User's Manual (MUT)
Mod. A1735-A1835-A1735B-A1835B HV Boards
24/03/2014
8
NPO:
Filename:
Number of pages:
Page:
00101/00:17XXx.MUTx/08
A1735B-A1835B_REV8.DOCX
14
6
1.2 Channel Characteristics Table
Table 1.1 - Channel characteristics of the Mod. A 1735 / 1735B - A 1835 / 1835B HV Boards
Polarity: Positive / Negative depending on purchased version
Output Voltage: 0÷1.5 kV
Max. Output Current:
low range 200 µA (Mod. A 1835 - A 1835B)
high range 7 mA
Voltage Set/Monitor Resolution: 100 mV
Current Set/Monitor Resolution:
500 nA (Mod. A 1735 - A 1735B)
20 nA / 500 nA depending on current range
(Mod. A 1835 – A 1835B)
VMAX hardware: 0÷1.5 kV common for all the board channels
VMAX hardware accuracy:
± 2% of FSR
VMAX software: 0÷1.5 kV settable for each channel
VMAX software resolution: 1 V
Ramp Down: 1÷500 Volt/sec, 1 Volt/sec step
Ramp Up: 1÷500 Volt/sec, 1 Volt/sec step
Voltage Ripple:
3
< 30 mV pp
Voltage Monitor vs. Output Voltage Accuracy:
4
± 0.2 V ± 0.3% of reading
Voltage Set vs. Voltage Monitor Accuracy:
2
± 0.1 V ± 0.3% of setting
Current Monitor vs. Output Current Accuracy:
2
± 2 µA ± 2% of reading (7 mA range)
± 0.1 µA ±
2% of reading
(200 µA range, Mod. A 1835 - A 1835B)
Current Set vs. Current Monitor Accuracy:
2
± 0.5 µA ± 2% of setting (7 mA range)
± 0.02 µA ±
2% of setting
(200 µA range, Mod. A 1835 - A 1835B)
3
From 10 Hz to 15 MHz at full load
4
From 10% to 90% of Full Scale Range