EasyManua.ls Logo

Cafe C7CEBAS3RD3 - Getting Started

Cafe C7CEBAS3RD3
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Getting Started
NOTE: For household use only.
General Information
We DO NOT recommend using oily beans (found in some dark roasts). See page 17 for
more information.
Place drip tray before turning on the machine. The machine rinses upon first start up.
Recommend starting at medium grind size and adjusting slowly per taste.
Drip Tray
Remove the drip tray from the packaging and connect it to the front of the espresso
machine, under the coffee spout.
NOTE: There are magnets that will allow the drip tray to lightly adhere to the machine.
Remove drip tray before lifting or moving the machine.
Water Tank
Remove the water tank and fill it with water. Replace in
the machine before using any functions.
Rinsing Cycle: The machine will rinse automatically at
every power ON. After the machine is preheated, it will
dispense a small amount of hot water directly into the
drip tray. This is to keep the machine clear of coee
residue. Machine will only rinse if it was Powered ON
from cold state.
NOTE: DO NOT add hot water to the water tank. This
could damage the appliance.
Coee Bean Container
Lift the lid located on the top of the espresso machine and fill it with coee beans. Close
the lid tightly when finished. Make sure rubber seal is closed completely
to preserve freshness of beans.
NOTE: When grinding is in process, turn the coffee bean dial to your
desired grind size. Run with coffee bean container lid open to access
grinder adjustment dial.
NOTE: It may take several tries to get a grind size that best fits your taste.
Ready to Use!
Plug in your espresso machine. The Power button will flash. Press the power button.
Choose your desired function and enjoy! See the "Using the Espresso Machine" section for
instructions of each function.
Water Tank
Coee Bean
Container

Related product manuals