Why is Cafe Coffee Maker dispensing coffee slower than normal?
If your Cafe Coffee Maker is dispensing coffee slower than usual, the coffee grounds might be too fine. Adjust the coffee grinder so that the grounds are slightly larger until the water flow returns to normal.
Why does my Cafe Coffee Maker say 'Add/Stir Coffee Beans' when full?
If your Cafe Coffee Maker displays the 'Add/Stir Coffee Beans' indicator even when the hopper is full, it could be because the internal coffee outlet is blocked. Clean the coffee grinder shoot. Alternatively, the beans may be too oily and not sliding freely into the grinder. Stir the beans in the container to help them slide down, and avoid using oily beans if possible.
Why does Cafe C7CEBBS3RD3 espresso shot have no crema?
If your espresso shot lacks crema, it could be due to a few factors. The coffee ground might be too coarse, so adjust the coffee bean grind size to a smaller setting during grinding. Also, the coffee beans might not be fresh, so consider changing to fresher beans. The brew temperature could also be incorrect for the type of coffee you're using; adjust the temperature using the SmartHQ app.
Why is Cafe C7CEBBS3RD3 Coffee Maker dispensing watery coffee?
If your Cafe Coffee Maker is dispensing watery coffee, it could be due to several reasons. This commonly occurs during the first brewing cycle, so optimize the coffee extraction with the next brew. The brew module might be dirty, so remove and clean it. A grinder setting that is too coarse or low coffee bean level can also lead to watery coffee. Adjust the coffee bean grind size to a smaller setting or refill the coffee bean container.
What to do if Cafe C7CEBBS3RD3 Coffee Maker buttons are not responding?
If the buttons on your Cafe Coffee Maker's control panel aren't responding or are delayed, it could be due to a dirty or wet panel. Unplug the unit and clean the panel with the provided cloth, ensuring it is dry. Another possibility is electromagnetic interference. In this case, unplug the machine, wait a few minutes, and then plug it back in.
What to do if coffee does not come out of Cafe C7CEBBS3RD3 Coffee Maker spout?
If coffee isn't dispensing from your Cafe Coffee Maker, it could be due to several reasons. First, excessive scale buildup might be the cause; descale the appliance. Alternatively, the empty system function might have been activated, so run the hot water function until water starts dispensing. A pump airlock (air in the water pump) or a blockage in the spout could also be the issue; try running the hot water function until water flows normally.
How to make Cafe Coffee Maker coffee less hot?
If your coffee is too hot, the temperature setting may be too high. Connect your appliance to the SmartHQ app and adjust the temperature to your preferred setting.
Follow safety precautions when using the appliance, including grounding, surface setup, and unplugging.
Instructions for attaching the drip tray to the espresso machine under the coffee spout.
Guide to filling the water tank and notes on the rinsing cycle and avoiding hot water.
How to fill the coffee bean container, close the lid, and adjust the grind size.
Steps to plug in the machine, press the power button, and select a function.
Identifies key parts like Water Tank, Coffee Bean Container, Coffee Spout, Steam Wand, and Drip Tray.
Details components such as Service Door, Coffee Brewer, Disposal Box, and Drip Tray Grate.
Notes that the steam wand is only available with specific models.
Details the cleaning kit items: Pin/Needle, Microfiber Cloth, Cleaning Brush, and Cleaning Solution.
Information about Water Hardness Strips used for testing water quality.
Notes that the Milk Pitcher is included only with specific models.
Lists and shows buttons like Power, Espresso, Americano, Lungo, My Cup, Steam, and Hot Water.
Presents distinct control panel layouts for different espresso machine models.
Details Espresso, Lungo, Americano, and My Cup functions with default settings and notes.
Explains the Steam function for frothing milk and the Hot Water function for dispensing hot water.
Describes alerts like Add Water, Add/Stir Beans, Check Brew Unit, Empty Waste, Descale, and Rinsing.
Guide on using the Coffee Grinder Knob to adjust grind size for optimal coffee extraction.
Instructions for removing the steam wand for cleaning and its stainless steel cover.
How to adjust the steam wand side-to-side and the coffee spout up-and-down for cup placement.
Steps to turn on the espresso machine using the Power button.
How to select and brew Espresso, Lungo, Americano, and My Cup drinks.
Instructions for using the Steam function for milk and the Hot Water function.
Guide on how to set a custom dispense volume for selected functions.
Steps for cleaning the exterior, water tank, drip tray, and disposal tray using hand wash methods.
Instructions for cleaning the coffee brewer, service area, and grinder chute with provided tools.
Detailed guide on performing the two-stage descaling process for the machine.
Instructions for emptying the system for long-term storage.
Guidance on using the test kit and setting water hardness in the SmartHQ app.
Tips on using any coffee bean, avoiding oily beans, and preheating cups.
Instructions for steaming milk to create microfoam for Cappuccinos and Lattes.
Detailed steps for positioning the steam wand to achieve desired milk texture and temperature.
Solutions for power issues, delayed response, and panel cleaning.
Addresses issues with coffee not hot enough, too hot, or lacking crema.
Solutions for no coffee out of spout, slow dispensing, and incorrect grind size.
Troubleshooting microfoam generation, slow heating, and water sensor alerts.
Resolves 'Add/Stir Beans' indicator on, loud grinder noise, and disposal of grounds without brewing.
Addresses watery coffee, removal of brew unit, and disposal drawer issues.
Solutions for no steam/hot water from wand, and mid-process function cancellation.
Steps to enable and connect the espresso maker to WiFi using the SmartHQ app.
Information on using the SmartHQ app for remote monitoring, control, and notifications.
Details the device's compliance with FCC and Industry Canada rules and potential interference.
Specifies RF exposure guidelines for the ConnectPlus module and body separation distance.
Explains the one-year warranty period, what it covers, and how to initiate a claim.
Lists items and conditions not covered by the limited warranty, such as misuse or accidental damage.
Describes limitations on implied warranties and consumer rights in specific states/Canada.
Information on accessing the website for product support, shopping, and online services.
Guidance on registering the appliance online and ordering parts/accessories.
Provides contact details for customer service in the US and Canada for inquiries and feedback.
General| Color | matte black, black |
|---|---|
| Built-In Grinder | yes |
| Removable Water Tank | yes |
| Double Shot | no |
| Programmable | yes |
| Automation Level | automatic |
| Preheat Time | 90 seconds |
| Steam Nozzle | yes |
| Warming Plate | no |
| Removable Drip Tray | yes |
| Control Type | electronic |
| Decalcification Indicator | yes |
| Power Consumption | 1470 watts |
| Voltage | 120 volts |
To Next Page
