cahors CAP5510 User Manual

INSTRUCTIONS
Digital Terrestrial Programmable Amplifiers
CAP5510
REF. 0145056R13
CS 60022 • 46003 Cahors cedex 9 - France
Tél. +33 (0)5 65 35 82 20 • Fax +33 (0)5 65 35 82 52
www.cahors-ced.com
www.groupe-cahors.com
SUMMARY

cahors CAP5510 Specifications

General

Brand	cahors
Model	CAP5510
Category	Amplifier
Language	English

Summary

Installation Guide

Wall Mount Installation

Guidelines for mounting the CAP5510 housing indoors or in a protective cabinet.

Connecting Antennas

Instructions for connecting antenna cables to the CAP5510 based on selected configurations.

Programming Operations

UHF Range Programming

Procedure to program the UHF frequency range for LTE filters (LtE.0, LtE.4, LtE.5).

Filter Configuration

Entering the mode to configure filters, manage filter groups and bandwidth.

Programming of Filters

Setting UHF filters, their width (1-7 channels), and attenuation level.

UHF Input Attenuator Setting

Adjusting UHF input attenuator levels from 0 to -20dB via the setup menu.

UHF Output Level Attenuation

Adjusting the general levels of output UHF signal after input configuration.

B.I/FM, B.III/DAB Attenuator Settings

Input Power Supply Configuration

Automatic Equalization and Output Level Adjustment

Passcode Tamper Security

Resetting the Central Unit

Safety and Usage Precautions

Sector Connection Safety

Surge Protection Warning

Ventilation Requirements

Antenna Connection Precautions

Distribution Network Connection

Central Unit Location

Voltage Peak Protection

Foreign Objects Warning

Component Replacement