CalAmp FOB10-BL User Manual

Configuration for each button
configuration units / bit size (bytes) default
Event Generation mask (see below) 1 00111100
Generate events on
releasing button from
short press & when long
pressed & keep
generating long press
events until button is
released.
Event generation mask for each button coded as 1 byte
description mask (top 2 bits are reserved)
generate message on min short press timeout 00xxxxx1
generate message on short press repeat timeout
00xxxx1x
generate message on short press release
00xxx1xx
generate message on long press timeout
00xx1xxx
generate message on long press repeat timeout 00x1xxxx
generate message on long press release
001xxxxx
Keyfob configuration
Stored on individual Keyfobs.
units / bit size (bytes) default
Short Press minimum 100ms 1 2
Short Press Repeat 100ms 1 2
Long Press time 100ms 1 15
Long Press Repeat 100ms 1 5
beacon interval
1ms
1
8750
beacon duration after keypress
1s
1
0 (always and forever)
CID n/a 2 0xFFFF
(0xFFFF is special case and is
always processed) otherwise
this CID must match the CID
in the LMU
Tx power
db
1
0
Low Battery LED blink % % 1 20
Button push LED blink
n/a
1
0x07 all 3 buttons cause blink
when pressed (0x0f if 4
buttons)
Config button 1 (see above)
n/a
1
0x3c
Config button 2 (see above) n/a 1 0x3c
Config button 3 (see above) n/a 1 0x3c
reserved (for 4
th
button) n/a 1 0x00

CalAmp FOB10-BL Specifications

General

Brand	CalAmp
Model	FOB10-BL
Category	Security System
Language	English