GETTING STARTED...............................1
Key Definitions.....................................1
Preference Settings ...........................11
Entering Dimensions .........................13
Conversions.......................................14
Basic Math Operations ......................16
Percentage Calculations....................17
Memory Operation.............................18
Paperless Tape..................................19
USING THE CONCRETECALC PRO...20
Length, Width, and Height Keys........20
Circle Calculations.............................23
Squaring-Up a Concrete Slab ...........26
Calculating Rebar ..............................27
Calculating Loads ..............................29
Blocks and Bricks ..............................30
Polygon (Equal-Sided).......................31
Concrete Footing ...............................32
Finding Weight Per Volume...............33
Concrete Bags...................................33
Calculating Drop ................................34
Stair Calculations...............................36
APPENDIX ............................................40
Accuracy/Errors .................................40
Battery and Auto Shut-Off .................41
Default Settings .................................42
Area Formulas ...................................43
Surface Area and Volume Formulas..44
REPAIR AND RETURN.........................45
Warranty, Repair and Return
Information.......................................45
WARRANTY ..........................................46
TABLE OF CONTENTS
To Next Page
Loading...
Need help?
General
