Cooktop Use
36
Use & Care Manual
USING THE COOKTOP SURFACE BURNER IGNITION
TO LIGHT THE TOP BURNERS, PUSH AND TURN THE APPROPRIATE CONTROL KNOB COUNTER
CLOCKWISE TO THE “HI” POSITION. YOU WILL HEAR A CLICKING NOISE – THE SOUND OF THE
ELECTRIC SPARK IGNITER IGNITING THE BURNER. ONCE BURNER IS LIT, THEN TURN THE BURNER
CONTROL KNOB TO THE DESIRED HEAT SETTING.
NOTE: WHEN ONE BURNER IS TURNED TO THE “HI” POSITION, THE BURNER IGNITERS WILL
SPARK. DO NOT ATTEMPT TO DISASSEMBLE OR CLEAN AROUND ANY BURNER WHILE ANOTHER
BURNER IS ON. DO NOT TOUCH ANY BURNER CAP, BURNER BASE, OR IGNITER WHILE THE IGNITERS
ARE SPARKING.
SIMMER & BOIL
1. A SMALLER FLAME WILL GIVE THE BEST SIMMER RESULTS. SMALL FLAMES OFFER PRECISE
COOKING PERFORMANCE FOR DELICATE FOODS, KEEPING FOOD WARM, GOOD FOR MELTING
CHOCOLATE OR BUTTER, AND FOR COOKING THAT NEED TO COOK OVER LOW HEAT FOR A LONG
TIME.
2. THE HIGHEST (LARGER) FLAME SETTINGS PROVIDE THE MAXIMUM HEAT THAT IS AVAILABLE ON
YOUR RANGE. THIS SETTING COULD BE USED FOR HEAVIER COOKING SUCH AS WATER BOILING OR
PASTA COOKING ETC.
To Next Page
