Cambium Networks PMP/PTP 450i Series Configuration And User's Guide

PMP 400/430 and PTP 200/230 Series Configuration and User Guide
pmp-0042 (March 2014) Page 9 of 98
PTP 200 Series Backhauls –5.4 and 4.9 GHz
Figure 7: PTP 200
Integrated
PTP 54200 and 49200
Figure 8: PTP 200
Connectorized
PTP 54200 and 49200
PTP 230 Series Backhauls –5.4 and 5.8 GHz
Figure 9: PTP 230
Integrated
PTP 54230 and 58230
This guide should be used along with the PMP Solutions User Guide, which covers general information,
including all network features, RF control features, and GUI (Graphical User Interface) features common
across PMP 100, 400, and 500 Series networks and PTP 100 and 200 Series bridges. The PMP Solutions
User Guide is available from the “PMP Software and Documentation” section of the Cambium Document
Library, http://support.cambiumnetworks.com/pmp/software/index.php.
This guide assumes that the reader has general RF (Radio Frequency) and Internet Protocol (IP) knowledge
and background.
This issue is consistent with features provided by Canopy Release 12.1. Separate Release Notes for each
release are available and include open issues and other important information specific to each release.
Software and software release notes can be downloaded from the Cambium support web site:
http://support.cambiumnetworks.com/pmp/software/index.php.

Cambium Networks PMP/PTP 450i Series Specifications

General

Brand	Cambium Networks
Model	PMP/PTP 450i Series
Category	Wireless Access Point
Language	English