Cambium Networks PMP/PTP 450i Series Release Notes

Release Notes
System Release 13.4
pmp-0979 - July 2015 Page 9 of 50
Figure 3 Login page - Security Banner
Note:
The user must accept “I have read, understood and accept the above
notice(s)” to proceed with login. The login button will not be enabled until
user accepts notice message.
Note:
The user is not allowed to save changes with empty Security Banner Notice if
the Security Banner is enabled. The user will be given a prompt stating
“Security Banner Cannot be empty”.
SNMP
Table 4 Security Banner SNMP objects
Name
OID
MIB
Access
Syntax / Description
enableSecuri
tyBanner
.1.3.6.1.4.1.161.19.
3.3.2.251.0
INTEGER
Read-write
1:enable, 0:disable
textSecurity
Banner
.1.3.6.1.4.1.161.19.
3.3.2.253.0
DISPLAYSTRIN
G
Read-Only
1200 characters of
Security Banner
acceptSecuri
tyBanner
.1.3.6.1.4.1.161.19.
3.3.2.254.0
INTEGER
Read-write
1: enable user must
accept before login,
0: disable, not
required.

Cambium Networks PMP/PTP 450i Series Specifications

General

Brand	Cambium Networks
Model	PMP/PTP 450i Series
Category	Wireless Access Point
Language	English