Chapter 1: Configuration Configuring security
Page
1-119
Port configuration
450 Platform Family ODUs support access to various communication protocols and only the ports
required for these protocols are available for access by external entities. Operators may change the port
numbers for these protocols via the radio GUI or SNMP.
The Port Configuration page of the AP/SM/BHM/BHS is explained in Table 39.
Table 39 Port Configuration attributes – AP/SM/BHM/BMS
FTP Port The listen port on the device used for FTP communication.
HTTP Port The listen port on the device used for HTTP communication.
HTTPS Port The listen port on the device used for HTTPS communication
Radius Port The destination port used by the device for RADIUS communication.
Radius Accounting
Port
The destination port used by the device for RADIUS accounting
communication.
SNMP Port The listen port on the device used for SNMP communication.
SNMP Trap Port The destination port used by the device to which SNMP traps are sent.
Syslog Server Port The destination port used by the device to which Syslog messaging is sent.
Encrypting downlink broadcasts
See Encryption downlink broadcast in Installation and Planning Guide.
Isolating SMs
See Isolating SMs in Installation and Planning Guide.
To Next Page
Loading...
Need help?
General
