AP PART
No.
DRAWING NO DESCRIPTION QTY COMMENTS
Final assembl
us Control Box Powerswitch 1 Position in Place on the Front Panel
AP14819/1 Push Switch Bar Extension 1 Affix and
lue to Power Bar
CD4P AB05a Power Bar 1 Fitted to SW3 on main PCB
AP15512/1 Front Panel Insulation Sheet 1 Attach to main PCB with two tie-wra
lastic ties) Width 2.5mm 2 Attach insulation stri
to main PCB
PY592 AP10209/3 Cambrid
e Selector Knob Mk3 Silver 3
AP10224/1 Cambrid
e Knob Insert Mk2 3 Insert Into Selector Knobs
PY590 AP12750/2 Cambridge New Range Amp Volume Knob Silver 1
AP13361/1 A600 Volume Knob Blue Plastic Insert 1 Insert Into Volume Knob
AP13360/1 A600 Volume Knob Aluminium Skin 1 Glued and ta
ed In Place On Volume Knob
M3 X 10 Pozi Pan Plastite 4 To fix rear
anels
M2.6 X 6 Pozi Pan Machine Screw 12 To fix Bottom Panel To Side, Front And Rear Panels
M2.6 x ??? 4 To fix Bottom Panel To Side Panels (at corners)
AP14865/1 Cambridge Azur 340A Microcontroller
Cableform
1 From Main PCB J2 to Front Panel PCB CN2
AP14896/1 Cambridge Azur 340A Volume Control
Cableform
1 From Front Panel PCB CN5 to Volume Pot Motor
AP15204/1 Cambridge Azur 340A Earth Lead 1 From earth pin of IEC Scoket (CN3) on main PCB to Chassis
earth stud
M4 Nut Standard 1 Used To Fix earth lead to earth stud
M4 Lock Washer 1 For above nut
LED wireform is attached to main PCB Glue
e For Front And Rear Panels 2 Fix To The Correct Surfaces For Lid
AP13342/1 Liddin
e For Side Panels 2 Fix To The Correct Surfaces For Lid
PY640 AP14161/1 340A To
Panel (Silver) 1 Position To
Of The Product
PY516 M2.6 X 6 C/S Torx Machine Screw (Silver) 8 To Affix Top Panel to plastic Inserts, Side, Rear and Front
Panel
Packa
Serial Number Label, Blank (6.5X35.5mm) 1 print with serial number label and attached to rear panel
AP13612/1 Azur 2 Rid
1 Pack 340A Unit Inside
AP13504/2 Pol
For Remote Control 1 Pack Remote Control Inside,
Azur Remote Control Complete. Model No RC-
340AC/540AC/640AC
1 Fit into Poly Endcap, buttons to face polystyrene, Packing in
Rebate Provided
AAA Alkaline Batteries 3 For Remote. Place In Instruction Manual Pol
173X260X4C mm 1 For Instruction Manual and Remote Batterie
1830mm AC IEC Power Cord Set BS Standard
Fused 3 AMP
1 Must Be Bs Approved
AP13505/1 Carton Packa
With Handle 1 Printed To Artwork AP13716/1
AP14696/1 Carton Label (Model No.) 1 For Bo
e Carton 1
NOTES:
Issue 1 - 15.03.2004
Issue 2 - 23.04.2004