Need help?Do you have a question about the Cambridge Audio CXA60 and is the answer not in the manual?
General| Frequency Response | <5Hz - 60kHz +/-1dB |
|---|---|
| Weight | 8.3 kg (18.3 lbs) |
| Standby Power Consumption | <0.5W |
| Input Impedance | 47k Ohms |
| Damping Factor | >100 |
| Power Output | 60W RMS into 8 Ohms, 90W RMS into 4 Ohms |
| THD | <0.02% 20Hz - 20kHz, 80% of rated power |
| Inputs | 4 x RCA, 1 x 3.5mm |
| DAC | Wolfson WM8740 |
| Dimensions | 115 x 430 x 341 mm (4.5 x 16.9 x 13.4 inches) |
| Headphone Output | Yes |
| Input Sensitivity | 370mV |
| Speaker Outputs | A and B speaker outputs |
Covers installation, operation, and maintenance safety to prevent hazards.
Selects the desired input source for listening.
Selects digital input sources for listening.
Controls the sound level of all outputs from the amplifier.
Enables audio playback from a computer via USB (CXA80 model).
TOSLINK and S/P DIF co-axial digital inputs for audio sources.
Used to select the source inputs for audio playback.
Adjusts the volume level of the sound.
Details USB 2.0 and USB 1.1 compatibility and protocols.
Selects USB Class 1 or USB Class 2 mode for the USB interface.
Protects loudspeakers from DC voltage faults.
Protects amplifier from overheating due to high listening levels.
Protects output transistors from operating outside Safe Operating Area.
Checks for short circuits at loudspeaker terminals during power up.
Detects and reduces volume when amplifier starts to clip.
Checks for power connection, wall socket, and fuse issues.
Checks for standby mode, source connection, speaker connection, and mute status.
Refers to the CAP5 protection system for fault indication.
To Next Page