Need help?Do you have a question about the Cambridge Audio CXA61 and is the answer not in the manual?
General| Power Output | 60W RMS into 8 Ohms, 90W RMS into 4 Ohms |
|---|---|
| DAC | ESS Sabre ES9010K2M |
| Weight | 8.3 kg (18.3 lbs) |
| Input Impedance | 47k Ohms |
| Frequency Response | <5Hz–60kHz +/-1dB |
| Analog Audio Inputs | 4 x RCA |
| Digital Audio Inputs | 2 x Optical, 1 x Coaxial |
| Bluetooth | AptX HD |
| Outputs | Speaker A+B, Headphone, Preamp Output, Subwoofer Output |
| Dimensions | 115 x 430 x 341 mm (4.5 x 16.9 x 13.4") |
| USB Input | USB Audio Class 2.0 |
Key safety guidelines for safe operation and installation of the amplifier.
Instructions on proper placement, ventilation, and avoiding heat/vibration.
Safety for power connection, overloading, and cleaning the unit.
Guidance on battery disposal and when to seek professional servicing.
Important warnings about enclosure, fire risk, moisture, explosion, and battery heat.
Regulatory compliance marks for different regions including EU, Australia, and Russia.
US and Canadian compliance rules, including RF exposure and interference.
Official EU declaration for product compliance and Bluetooth frequency details.
Procedure for getting warranty service from an authorized dealer.
Conditions that void warranty and items not covered, like cosmetic damage.
Disclaimer on incidental damages and consumer legal rights.
Details on AC power, RS232C, Control Bus, and IR IN ports.
Connections for loudspeakers (A/B) and audio outputs like Sub Out, Pre-Out.
Overview of all rear panel input connections including USB and digital audio.
Controls for standby, front MP3 input, and headphone output.
Buttons for choosing audio sources and indicators.
Controls for speaker selection, muting, and volume adjustment.
Description of the remote control's functions.
Remote buttons for display brightness, muting, and power.
Remote buttons for selecting inputs and adjusting volume levels.
Diagrams for basic, speaker B, and pre-out connections.
Explanations for balanced audio and USB audio connection methods.
Setting up USB Audio Class 1 or Class 2 for different operating systems.
How to enter the setup menu and configure Auto Power Down.
Enabling clipping detection and selecting USB audio modes.
Instructions for Bluetooth audio streaming and device pairing.
How the Control Bus synchronizes Cambridge Audio products.
Using the StreamMagic app to control the CXA via the CXN.
Diagrams for integrating CXA with CXN/CXC using Control Bus.
Explains DC detection and over-temperature protection modes and indications.
Details overvoltage/overcurrent and short circuit protection features.
Describes the intelligent clipping detection feature and its automatic volume reduction.
Steps to resolve problems like no power or no sound output.
Fixing single channel sound, hum, buzz, and remote control problems.
Explains the meaning of flashing lights related to the CAP5 protection system.
Specifications for power output, THD, and frequency response.
Details on S/N ratio, input sensitivity, and input impedance.
Lists supported input/output types, USB, Bluetooth, and compatibility.
Specifications for power consumption, physical dimensions, and weight.
To Next Page