Need help?Do you have a question about the Cambridge Audio CXA80 and is the answer not in the manual?
General| Power Output | 80W RMS into 8 Ohms, 120W RMS into 4 Ohms |
|---|---|
| DAC | Wolfson WM8740 |
| Frequency Response | 5Hz - 60kHz (±1dB) |
| THD | <0.02% @ 20Hz - 20kHz, 80% of rated power |
| Inputs | 4 x RCA, 1 x XLR, 1 x Coaxial |
| Outputs | 1x preamp output, 1x subwoofer output |
| USB Input | USB Audio Class 1.0 and 2.0 |
| Weight | 8.7kg |
| SNR | >93dB (unweighted) |
| Bluetooth | Optional BT100 Bluetooth receiver |
| Dimensions | 115 x 430 x 341mm (H x W x D) |
Covers essential warnings like avoiding water, heat, proper ventilation, and plug safety.
Information on product certifications (CE, etc.) and WEEE disposal guidelines.
Details US Federal Communications Commission rules regarding radio frequency interference.
Guidance on air flow, placement away from heat/sun, and stable surfaces for correct operation.
Information on power connection, avoiding overloaded outlets, and cleaning procedures.
Procedures for responsible battery disposal and advice on when to contact service personnel.
Details the terms and conditions of the manufacturer's warranty for the product.
Controls for turning the unit on/off, standby mode, and adjusting the sound level.
Buttons for selecting audio sources and the front panel MP3 input jack.
Details Balance, Bass, and Treble controls for fine-tuning the audio output.
Information on selecting speaker sets and using the headphone output.
Details the AC power socket and the primary connectors for attaching loudspeakers.
Covers Sub Out and Pre-out connections for expanding the audio system with subwoofers or other amplifiers.
Explains the various analog (A2-A4, A1) and digital (D1-D3) input ports for audio sources.
Covers USB audio, Control Bus, and BT100 Bluetooth adaptor ports for advanced integration.
Covers Standby/On, Mute, and Volume Up/Down for fundamental control of the amplifier.
Details how to select audio sources and adjust display brightness via the remote.
Shows typical setup with a CD player and connecting a second set of speakers.
Illustrates connecting to power amplifiers/subwoofers and using high-quality balanced XLR cables.
How to connect the CXA80 to computers, including advanced modes and driver information.
Specific instructions for connecting and using USB audio with PCs, Macs, and Linux systems.
Information on connecting the BT100 adaptor for wireless audio streaming from devices.
Step-by-step guide for pairing Bluetooth devices and using the BT100 adaptor for audio streaming.
Explains how to configure Auto Power Down, Clipping Function, and USB Mode settings.
Details how to use the Control Bus for synchronizing CX Series products and app control.
Diagram showing how to link CXA and CXN via Control Bus for synchronized operation.
Illustrates connecting CXA, CXN, and CXC for unified control and app functionality.
Details the five protection methods (DC detection, Over temperature, etc.) used by the amplifier.
Addresses problems like no power, no sound, buzz/hum, and remote control failure.
Covers power output, THD, frequency response, and S/N ratio for audio quality assessment.
Details input sensitivities, impedances, types of audio inputs/outputs, and USB audio compatibility.
Includes power consumption, control types, dimensions, and weight of the unit.
To Next Page