AUTO POWER DOWN (APD)
This unit has an Auto Power Down function. The product will
automatically switch to standby mode after inactivity of 20
minutes.
DISABLING THE AUTO POWER DOWN
If you wish to disable the APD function, then press and hold
the power button for 5 seconds when in standby. This can then
be reset to factory defaults by plugging in the mains lead with
the standby button held down.
For more frequently asked questions (FAQs), technical advice
and information on getting the most out of your Solo/Duo,
please visit the Support section on Cambridge Audio’s website:
https://techsupport.cambridgeaudio.com
For all servicing, in or out of warranty, please contact your
dealer.
To Next Page