11
Setting buttons for programming
F
Command Parameter Range Default Example SMS Notes
Association buttons - telephone numbers A-B-C-D -
0000AA[mobile number]
-
0000BA[mobile number]
0000CA[mobile number]
0000DA[mobile number]
Call cycles 1-9 1 0000G1 -
Call timeout 1-9 3 0000H1 1=1min
Ring tone 0-1 1 0000I1 0=O 1=On
Timeout between calls 1-9 9 0000K9 9=45 sec
Button lock 0-1 1 0000LAA1 0=O
Button test - - 0000MAA -
Deleting single number - - 0000NAA1 1=Position 1
Deleting all numbers - - 0000O*# -
Password 4 DIGIT 0000 0000P1234 -
Gate release 0-2 0 0000Q1 0=O 1=Relay 2=Relay
Send automatic credit sms 0-30 0 0000T0 0=O
Credit sms receipt number 16 DIGIT - 0000U[credit sms receipt number] -
Choose language 0-1-2-3-4 0 0000V0
0=Italian 1=English
2=French, 3=German,
4=Spanish
Speaker volume 1-9 7 0000X7 -
Microphone gain 0-9 7 0000Y7 0=Mute
Signal quality - - 0000Z -
* Relay 1 activation - - 0000* -
# Relay 2 activation - - 0000# -
** Relay 1 closure time 0-9 3 0000**3 0=Deactivated 3=3 sec
## Relay 2 closure time 0-9 3 0000##3 0=Deactivated 3=3 sec
Associating call buttons and telephone numbers
Function Setting up and/or editing the telephone numbers con-
tained and associated with the buttons (AA up to DA)
SMS Syntax <pin><command><position><telephone no>
<pin> 0000 (Default)
<command> AA, BA, CA, DA or aa,ba,ca,da
<position> 1, 2, 3, 4, 5
<telephone no> 14 digits max
SMS syntax example
0000AA13331234567
SMS reply example
Numbers associated to AA:
349.......
Automatic reply
SMS
Yes
1 BA1
2
BA2
3
BA3
4
BA4
5
BA5
1
AA1
2
AA2
3
AA3
4
AA4
5
AA5
For each key a maximum of 5 mobile numbers
can be stored.
Call cycles
Function Setting up and/or editing the call cycles of
phone numbers, should the user not answer
the call
SMS Syntax <pin><command><value>
<pin> 0000 (Default)
<command> G or g
<value> 1, 2, 3, 4, 5, 6, 7, 8, 9
SMS syntax example 0000G1
SMS reply example 1
Automatic reply SMS Yes
Default 1
Example: with the SMS 0000G1 1 call cycle is set;
with 0000G2 2 call cycles are set;