CAME BXV04ALS - User Manual

Sliding-gate operators
BXV04AGS BXV06AGS BXV08AGS
BXV10AGS BXV04RGS BXV06RGS
BXV08RGS BXV10RGS BXV06AGM
BXV10AGM BXV04ALS BXV06ALS
BXV08ALS BXV10ALS
INSTALLATION MANUAL
FA01442-EN
EN English

CAME BXV04ALS Specifications

General

Brand	CAME
Model	BXV04ALS
Category	Gate Opener
Language	English

Summary

Sliding-gate Operators

General Precautions for Installers

Important Safety Instructions

Crucial safety guidelines for installers to prevent serious bodily harm and ensure proper operation.

Main Points of Danger

Product Data and Information

Product Model Descriptions

Intended Use

Specifies the intended application for residential and apartment block sliding gates.

Description of Parts

Operator Components

Control Board

Control Board Description

Details the functions, settings, and user management on the control board display.

Product Size Specifications

Usage Limitations

Specifies maximum gate lengths and weights for different operator models.

Technical Data

Installation

Preliminary Installation Operations

Tasks before physical installation, including digging holes and preparing wiring.

Laying the Anchoring Plate

Instructions for setting up the foundation frame and anchoring plate for the operator.

Setting Up the Operator

Steps for placing the operator on the anchoring plate and preparing for cable connection.

Fastening the Rack

Instructions on how to secure the gate rack to the gate leaf.

Adjusting Pinion-Rack Coupling

Guidance on adjusting the coupling distance between the operator pinion and the gate rack.

Fastening the Operator in Place

Steps to secure the operator to the anchoring plate after adjusting the coupling.

Mechanical Limit Switches Setup

Procedure for setting the opening and closing end points using mechanical limit switches.

Magnetic Limit Switches Setup

Procedure for setting opening and closing end points using magnetic limit switches.

Electrical Connections

Passing Electrical Cables

Guidelines for routing and connecting electrical cables safely and compliantly.

Power Supply

Information on connecting the system to the mains power supply and its output for accessories.

Command and Control Devices

Safety Devices

Information on connecting safety devices like photocells and their configuration.

Programming

Programming Button Functions

Explains the functions of the ESC, <>, and ENTER buttons for menu navigation and operation.

Getting Started with Programming

Initial steps for commissioning and starting the programming process after connections are made.

Functions Menu

Lists and describes various functions that can be configured via the programming menu.

Safety Devices Test Function (F5)

Function to test the correct operation of connected photocells after each command.

Obstacle with Motor Stopped Function (F9)

Allows the gate to remain idle if safety devices detect an obstacle.

Encoder Function (F11)

Automatic Closure Function (F19)

Sets the time delay before automatic closure after reaching the opening end point.

Gate Travel Speed Function (F28)

Slowdown Speed Function (F30)

Travel Sensitivity Function (F34)

Adjusts obstruction detection sensitivity during boom travel.

Slowdown Sensitivity Function (F35)

Adjusts obstacle detection sensitivity during slowdown, requires Encoder.

Opening Direction Function (F54)

New User Registration (U1)

Registers new users and assigns functions via transmitter or control device.

Radio Decoding (U4)

Selects the type of radio coding for transmitters, potentially deleting others.

Motor Type Setting (A1)

Sets the type of gearmotor installed (e.g., 400 kg, 600 kg).

Travel Calibration (A3)

Initiates the self-learning process for gate travel end points, requires Encoder.

Adjusting Motor Torque (A6)

Error Messages

E1 Calibration Error

E2 Adjustment Error

E3 Encoder Failure Error

E4 Service Test Failure Error

E7 Operating Time Error

E9 Obstacle Detected During Closing

E10 Obstacle Detected During Opening

E11 Maximum Obstacles Exceeded

E13 Limit Switches Both Open

E14 Serial Communication Error

E15 Incompatible Transmitter Error

E17 Wireless Communication Error

E18 Wireless System Not Configured

Paired Operation

Paired Operation Electrical Connections

Paired Operation Programming

Maintenance

General Checks and Lubrication

Component Wear and Release Check