CAME FTL Series

UNI 5739
M6x10
UNI 6593
Ø 6
UNI 6592
Ø 12
Ø 12
❿
⓫
UNI 5931
M8x20
p. 12 - Manual FA00995-EN - 01/2018 - © CAME S.p.A. -
Translation of the original instructions
Fastening the mechanical stops
Release the gearmotor.
When opening.
Entirely open the gate leaf. Fit the stop under the casing, against the transmission arm and fasten it with the
bolt.
⚠
If there are no ground stops, you must fit mechanical stops.
Release the gear motor and fasten the driven-arm to the gate-post brace as shown in the drawing
.