Need help?Do you have a question about the CAME FA4024CB and is the answer not in the manual?
General| Model | FA4024CB |
|---|---|
| Power Supply | 24V DC |
| Maximum Leaf Weight | 400kg |
| Operating Temperature | -20°C to +55°C |
| Protection Rating | IP54 |
| Safety Features | Obstacle detection |
General statement on product purpose and liability.
Crucial checks and precautions before starting installation.
Safety measures and procedures during the installation phase.
Guidance for safe user interaction with the system.
Important advice for safe ongoing operation.
Details on the operator's construction and main parts.
Defines authorized applications and operational boundaries.
Lists included components and detailed technical specifications.
Visual representation of the operator's size and measurements.
Detailed list and explanation of individual parts.
Illustrates a typical installation setup.
Visuals showing the gate in various operating situations.
Guidelines for qualified personnel and regulatory compliance.
Lists required items and specifications for connections.
Instructions for routing and protecting electrical cables.
Steps for correctly attaching operator and gate brackets.
Detailed process for marking, drilling, and fixing brackets.
Instructions for removing the cover and unlocking the gearmotor.
Procedure to mount the gearmotor onto the pillar bracket.
Instructions for connecting transmission and drive arms.
How to install and adjust mechanical end stops for gate movement.
Procedure to set the gate's closing travel limit.
Procedure to set the gate's opening travel limit.
Information on power supply and system wiring.
Details types and ratings of fuses used in the system.
Identifies and explains functions of control board parts.
Illustrates the electrical power connections for the system.
Explains the purpose of indicator lights and flashing signals.
Describes various control inputs like buttons, keypads, and readers.
Explains antenna connection and radio system components.
Wiring diagram for connecting one gearmotor with encoder.
Wiring diagram for connecting two gearmotors with encoders.
Instructions for connecting and configuring photocell safety devices.
Guidance on wiring and setting up sensitive edge safety devices.
Details on connecting photocells for safety and inhibit functions.
Explains the function to reduce photocell power consumption.
Procedures for saving and loading user data and system configurations.
Guide on using the display and buttons for system programming.
Instructions on navigating through the programming menus.
List of all programmable functions and their codes.
Steps for performing motor tests and calibrating the gate run.
Explains operation and settings for functions F1 through F10.
Explains operation and settings for functions F11 through F22.
Details operation and settings for functions F23 through F60.
Instructions for adding, deleting, and managing users.
Step-by-step guide to register new users and associate commands.
Procedures for removing registered users from the system.
Detailed steps for testing the gearmotor operation.
Procedure to confirm the correct direction of motor rotation.
Steps to start the automatic gate run calibration process.
Detailed guide on the automatic calibration sequence.
Instructions for closing and securing the gearmotor housing.
Procedures for manually releasing and locking the gearmotor.
Specific guidance for bracket installation for gates opening outwards.
A log to record periodic maintenance activities.
Log for noting extraordinary maintenance, repairs, or improvements.
Explains system error codes for troubleshooting.
Explains the meaning of control board LED indicators.
Indicates status of blue LEDs during gate opening.
Indicates status of blue LEDs during gate closing.
Guidelines for environmentally sound disposal of the product and packaging.
States compliance with applicable reference regulations.
To Next Page
