5
4
3
2
1
1
2
3
5
6
4
Page 27 - Manual code: 119DW01EN vers. 5 2016/05 © CAME S.p.A. - The data and information provided in this manual are subject to change at any time without prior notice by CAME S.p.A.
FINAL OPERATIONS
Securing the cover
After making the electrical connections and completing programming, insert the cover on the gearmotor and secure it .
Close the hatch
, lock the gearmotor with the key and insert the protective cap .
N.B. when inserting the cover, pay attention to the cable connecting the FA001 card to the control board.
Releasing the gearmotor
RELEASING
LOCKING
The operator’s manual release may cause an uncontrolled movement of the gate, if the gate has any mechanical problems or if it is not level and properly
balanced.
To Next Page
Loading...
Need help?
General
