ESC < > ENTER
I
U
ESC < > ENTER
2
ESC < > ENTER
8
ESC < > ENTER
2
2
ESC < > ENTER
2
U
ESC < > ENTER
C
L
Page 24 - Manual code: 119DW01EN vers. 5 01/2017 © CAME S.p.A. - The data and information provided in this manual are subject to change at any time without prior notice by CAME S.p.A.
Info menu
H 1 Version
Shows the software version.
Select U 1.
Press ENTER to confirm.
... a number from 1 to 25 flashes for a few seconds.
Send the code from the transmitter or other com-
mand device (e.g. keypad selector).
Assign the number to the user entered.
User Associated command
1 - Mario Rossi open-close
2 - Paolo Verdi open
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21 -
22 -
23 -
24 -
25 -
Select U 2.
Press ENTER to confirm.
Choose the number of the user to delete using the keys marked with arrows.
Press ENTER to confirm...
... CLr appears to confirm the deletion.
Select a command to associate with the user.
The commands are:
- step-by-step (open-close) = 1;
- sequential (open-stop-close-stop) = 2;
- open =3;
- partial/pedestrian opening = 4.
Press ENTER to confirm...
Adding a user with associated command
N.B. when adding/deleting users, the numbers displayed fl ashing are numbers that are available and can be used for users to be added (max. 25
users).
Caution! Before adding users, remove the memory roll board if present.
Deleting a single user
To Next Page
Loading...
Need help?
General
