INTERCOM SYSTEM
PLX V WIFI installation guide
Here below we describe the installation guide of the PLX V WIFI indoor receiver, starting
from the programming of the intercom call up to the configuration of the VideoEntry APPs
connected to the same.
1. X1 SYSTEM PROGRAMMING:
Proceed to the X1 system programming, accordingly to the type of system managed
(MTM-LHS with VAS/101, MTM-THANGRAM-LHS with VA/01).
There are two ways to program the system, plus one configuration solution via app:
▪ MANUAL PROGRAMMING:
- proceed with the entry panel (one or more) configuration, accordingly to the
type of system managed
To Next Page
Need help?
General
