p.
- Manual:
FA00613-EN v.
1 - 11/2016 - © CAME S.p.A. The data and information in this manual may be changed at any time and without notice.
DESCRIPTION
Intended use
The electromechanical turnstiles are used to filter and regulate pedestrian traffic in areas with high intensity of passage such as stadiums, sports centres, subways,
public offices.
⚠
Opening the turnstile only 60° automatically resets it to its initial position.
⚠
Leaning on the arm before releasing the tripod will prevent the turnstile from opening.
001PST001 Bidirectional electromechanical turnstile in satin fi nished AISI 304 stainless steel with control board, transponder sensors, LED direction arrows
with display, lateral tra c lights and hydraulic damper. Automatic tripod release in the event of a blackout.
001PST002 Bidirectional electromechanical turnstile in satin fi nished AISI 304 stainless steel with control board, LED direction arrows with display, lateral
tra c lights and hydraulic damper. Automatic tripod release in the event of a blackout.
001PST003 Bidirectional electromechanical turnstile in satin fi nished AISI 304 stainless steel with control board, LED direction arrows with display, lateral
tra c lights, protection against climbing over and hydraulic damper. Automatic tripod release in the event of a blackout.
001PST004 Bidirectional electromechanical turnstile in satin fi nished AISI 304 stainless steel with control board, LED direction arrows with display, lateral
tra c lights, arm drop system and hydraulic damper. Automatic tripod release in the event of a blackout.
Technical data
Model
PST001-PST002-PST003-PST004
Protection rating (IP)
44
Power supply (V - 50/60 Hz) 120 - 230 AC
Current draw (mA) 260
Max weight (kg) 76
Insulation class I
Operating temperature (°C)
-20 ÷ +55
UNLESS EXPRESSELY STATED THE OPERATIONS SHALL BE VALID FOR ALL MODELS OF THE TWISTER SERIES REGARDLESS OF THE DRAWINGS SHOWN IN THIS MANUAL.
On all models, the top cover has a lock and is removable. The legs are removable. The head of the tripod is made of aluminum with a polished finish and the arms are
in AISI 304 polish finish stainless steel.
The bidirectional electromechanical turnstile is selective, in that it allows the passage in the chosen direction of a person at a time.
The turnstile is operated by a control device that unlocks the tripod. After passing the arms automatically reposition and the tripod locks until a new command is issued.
Protection against climbing over: a set of optical and micro sensors detects and reports any attempt to scale the turnstile.
Arm drop system: the horizontal arm drops to free the passage during emergencies where there is no line voltage.
This symbol indicates parts to read carefully.
⚠
This symbol indicates parts about safety.
☞
This symbol tells you what to say to the end users.
KEY
To Next Page
Loading...
