The machine stops running
and drains away water in
the washing process; FO
is displayed on the screen
Water feeding failure
◆ Check whether the faucet is open.
◆ Check whether the water inlet is frozen.
◆ Check whether the water inlet is blocked.
Phenomenon Solution
Washing machine vibrates
or is too noisy
The displayed washing time
deviates from the actual
washing time
◆ Check whether the installation place of the washing machine is flat
or tilted.
◆ Check if the washing machine is touching any other objects.
◆ Check if the laundry load is balanced in the inner drum of the
washing machine.
◆ A large amount of foam is generated due to excessive detergent
added; it is not a fault but foam processing by the machine. Normal
procedure will be restored automatically after foam elimination.
◆ There is deviation in the weight of laundry, watery supply time and
balancing time.
◆ The washing machine is equipped with a fuzzy logic control
system which can automatically detect balance of clothes in spin
procedure. To protect the washing machine from being damaged,
when poor balance or large eccentricity is detected, the spin time will
be extended appropriately to adjust balance of clothes, or the
washing machine will run at a lower speed.
Troubleshooting
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
To Next Page
