CamFive CFL-CMA1610T - Page 52

52
communication.
problem still exists, re-
start the computer and
machine.
2
LED3
indicator
stops
flashing
Check whether it
is copying a file.
If not, it indicates
the system is
down.
Re-start the machine.
3
Cannot
detect the
USB disk
1. Whether the
disk is write
protected.
Remove the write
protection.
2. Whether the file
system is FAT.
Change the file system to
FAT or FAT32. On the
computer, select USB
disk, right click the
mouse, select “Format”,
and select FAT or
FAT32 in the drop box
of “File System”.
3. The USB Disk
Type is not
supported.
Use another type of USB
disk.
4
File error
1. File copy fails.
The file in the
USB disk is
damaged or the
USB disk is not
connected
properly.
Change the file for
processing, or re-insert
the USB disk.
2. No space. The
internal flash
memory or the
USB disk has
insufficient space.
Delete unnecessary files.
3. Invalid file. It is
not the *.oux file
generated via
SmatCarve4.2
Generate files for
processing via
SmartCarve4.2.
4. Invalid update
file.
Please use the update file
provided by us. Or
replace the update file in
the USB disk.