Camon C6 - Maintenance Programme

CAMON Rotavators
PSR/AM/0914 Page 13
Maintenance Programme
OPERATION EVERY
DAY
EVERY
WEEK
EVERY YEAR
or 100 HOURS
ENGINE Check engine oil level 10w/40
See separate engine manual
X X
GEARBOX
&
CONTROLS
Check gearbox oil level
(see page 15)
X X
Check nuts & bolts
X X
Ensure clutch cable has free play
X
Check tyre pressure (20psi)
X X
Lubricate control cable/linkages
X
Check control cable operation
X
Check operation of safety devices
X
Change gearbox oil (see page 15)
Grease gear speed detent ball
X X
DIGGING
UNIT
Check condition of centre knife
X
Tighten nuts & bolts on knives
X X
Checknuts&studsonsideange
X X
Check drive unit oil level EP90
X X
NOTES:
*
Pressure washing machines removes lubricating grease as well as dirt.
It is imperative all linkages, especially the wheel speed lever detent ball and PTO swivel joint,
arekeptwellgreasedotherwisetheywillbecomedifculttooperateandcausedamage.
*
DO NOT allow maximum engine speed to exceed 3600rpm.