Camon C6 - Assembly Instructions

CAMON Rotavators
Page 6 PSR/AM/0914
1. Remove the machine from its packing case.
2. Rotatethehandlebarstemtotheoperatingpositionandtthehandlebars-checkoperationand
routing of cables.
3. Fit the wheels, ensuring the correct rotation (see diagram A below) and check the tyre pressures
(20psi).
4. Fit the gearbox dipstick.
5. Assembletherearaponthediggingunitensuringthestickerlabelsareontheoutside(see
diagram B below) and attach the unit to the machine.
6. Check the engine oil level.
7. Follow the instructions in this Owner’s Manual to run the machine.
Assembly Instructions
Diagram A
Diagram B