Campbell CR300 series - Ftppassword; Ftpport; Ftpusername; Httpenabled

23.3.11 FTPPassword
Specifies the password that is used to log in to the FTP server.
l
String data type
23.3.12 FTPPort
Configures the TCP port on which the FTP service is offered. The default value is usually sufficient
unless a different value needs to be specified to accommodate port mapping rules in a network
address translation firewall. Default = 21.
23.3.13 FTPUserName
Specifies the user name that is used to log in to the FTP server. An empty string (the default)
inactivates the FTP server.
l
String data type
23.3.14 HTTPEnabled
Specifies additions to the HTTP header in the web service response. It can include multiple lines.
Set to 1 to enable HTTP (web server) service or 0 to disable it.
23.3.15 HTTPPort
Configures the TCP port on which the HTTP (web server) service is offered. Generally, the default
value is sufficient unless a different value needs to be specified to accommodate port-mapping
rules in a network-address translation firewall. Default = 80.
23.3.16 HTTPSEnabled
Set to 1 to enable the HTTPS (secure web server) service.
23.3.17 HTTPSPort
Configures the TCP port on which the HTTPS (secure web server) service is offered. Generally, the
default value is sufficient unless a different value needs to be specified to accommodate port
mapping rules in a network address translation firewall.
23. Information tables and settings (advanced)214