Campbell CR300 series - Using Additional Communications Methods

If you experience problems with network communications, see Troubleshooting radio
communications(p. 176) for assistance.
13.3.4 Using additional communications methods
Using similar instructions, a RF407-series data logger can be used in a system with additional
communications methods. For example, in the following image, the router RF407-series data
logger communicates with LoggerNet through Konect PakBus Router. The router RF407-series
data logger communicates with the leaf RF407-series data loggers over RF.
The RF portion of this network requires no changes to the hardware settings described in the
previous procedure.
See the Konect Pakbus Router Getting Started Guide for more information on setting up that
part of the network.
13. Radio communications option68