C
calibration wizard
The calibration wizard facilitates the use of the CRBasic field calibration instructions FieldCal
() and FieldCalStrain(). It is found in LoggerNet (4.0 and later) or RTDAQ.
callback
A name given to the process by which the data logger initiates communications with a
computer running appropriate Campbell Scientific data logger support software. Also
known as "Initiate Comms."
CardConvert software
A utility to retrieve binary final data from memory cards and convert the data to ASCII or
other formats.
CDM/CPI
CPI is a proprietary interface for communications between Campbell Scientific data loggers
and Campbell Scientific CDM peripheral devices. It consists of a physical layer definition and
a data protocol.
CF
CompactFlash®
code
A CRBasic program, or a portion of a program.
Collect button
Button or command in data logger support software that facilitates collection-on-demand
of final-data memory. This feature is found in PC400, LoggerNet, and RTDAQ software.
Collect Now button
Button or command in data logger support software that facilitates collection-on-demand
of final-data memory. This feature is found in PC400, LoggerNet, and RTDAQ software.
Appendix C. Glossary261
To Next Page
Loading...
