12.2.2.2 Set up LoggerNet 48
12.2.2.3 Test the connection 49
12.3 Cellular (TX/RX) LED Indicator 50
12.4 Signal strength and quality 50
12.4.1 Signal strength 50
12.4.2 Signal quality 51
13. Radio communications option 52
13.1 Configuration options 53
13.2 Basic RF407 networks 54
13.2.1 Configure the base RF407-series radio 54
13.2.2 Configure the remote RF407-series data logger(s) 56
13.3 RF407-series radio communications with multiple data loggers through a data
logger router 59
13.3.1 Configure the RF407-series base radio 60
13.3.2 Configure the data logger acting as a router 62
13.3.2.1 Add routing data logger to LoggerNet network 65
13.3.3 Configure remote (leaf) data loggers 67
13.3.3.1 Add leaf data loggers to the network 67
13.3.4 Using additional communications methods 68
14. Testing communications with EZSetup 69
14.1 Making the software connection 70
15. Creating a Short Cut data logger program 71
15.1 Sending a program to the data logger 74
16. Working with data 76
16.1 Default data tables 76
16.2 Collecting data 77
16.2.1 Collecting data using LoggerNet 77
16.2.2 Collecting data using PC400 78
16.3 Viewing historic data 78
16.4 Data types and formats 79
16.4.1 Variables 79
16.4.2 Constants 80
16.4.3 Data storage 81
16.5 About data tables 82
Table of Contents - iii
To Next Page
Loading...
