4. From the Entire Network, on the left side, select the IPPort. Enter the Konect PakBus Router
DNS address and port number as noted in the Konect PakBus Router setup (Set up Konect
PakBus Router [p. 40]). Enter them into the Internet IP Address field in the format DNS:Port
with a colon separating DNS and Port. For example, axanar.konectgds.com:pppp where
pppp is the port number.
5. Leave the default settings for the PakBusPort. PakBus Port Always Open should not be
checked. In the TCP Password field enter the TCP Password; this must match the value
entered in the Konect PakBus Router setup and LoggerNet setup.
12. Cellular communications option44
To Next Page
Loading...
