Campbell MetSENS Series - Page 25

0000.200: Precipitation total
000.200: Precipitation intensity
+05.1 Supply voltage
0004 Status
└ ETX (End of String character; ASCII value 3)
36 Checksum (2 digit Hex Checksum sum figure calculated from the Exclusive OR
of the bytes between, and not including, the STX and ETX characters)
Table 7-6: Default settings
Setting Setting Setting
PROTOCOL: GILL AVGLONG: 10
1
SENSOR PRECIP: ON
3
COMMS: RS232 SENSOR COMPASS: ON
1
UNITS PRECIP: MM
3
BAUD: 9600 COMPASSDECL: +000.0
1
POWER: 0
NODE: Q SENSOR TEMP: ON
2
PUPMSG STATUS: ON
OUTFREQ: 1Hz UNITS TEMP: C
2
PUPMSG REPORT: ON
MSGMODE: CONT SENSOR DEWPOINT: ON
2
PUPMSG UNITS: ON
ASCTERM: CRLF UNITS DEWPOINT: C
2
MODBUS: RTU
ECHO : ON SENSOR PRESS: ON
2
MODADDR: 1
ALIGN: 0
1
UNITS PRESS: HPA
2
DATABITS: 8
SENSOR WIND: ON
1
HASL: +00000.00
2
STOPBITS: 1
UNITS WIND: MS
1
HASTN: +00000.00
2
PARITY: NONE
NODIR: 0.00
1
SENSOR RH: ON
2
MODTERM: 10
AVGSHORT: 60
1
UNITS RH: %
2
MODICT: 1000
1
Not available for the MetSENS300
2
Not available for the MetSENS200
3
Only available for the MetSENS550 and MetSENS600
MetSENS-Series Compact Weather Sensors 22