EasyManua.ls Logo

Campbell MetSENS Series - Specifications

Campbell MetSENS Series
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5. Specifications
Sampling rate:
1 Hz
Digital communication modes:
Serial RS-232, RS-485, SDI-12, NMEA, Modbus, ASCII
Default configuration
RS-485:
19200 baud rate, 8 data bits, even parity, one stop bit;
default Modbus address is 41
SDI-12:
Default SDI-12 address is 0
RS-232:
9600 baud rate, 8 data bits, even parity, one stop bit
IP rating:
66
Operating temperature range:
–40 to 70 °C
Operating voltage:
5 to 30 VDC
Typical current drain @ 12 VDC:
25 mA continuous high mode,
0.7 mA eco-power mode (1 hour polled)
Compliance: CE and RoHS compliant.
Where applicable, all individual parameters meet or
exceed specifications of IEC 61724-1 (2017, 2021).
Compliance documents available at:
www.campbellsci.com/metsens200
www.campbellsci.com/metsens300
www.campbellsci.com/metsens500
www.campbellsci.com/metsens550
www.campbellsci.com/metsens600
MetSENS-Series Compact Weather Sensors 5

Related product manuals