Candy CDCP 6 User Manual

Note:
ECO: This program is the test cycle. The information for comparability test in accordance with EN60436.
Change the Programme…
Premise: You can modify the washing program, When the dishwasher just runs for a short time. Otherwise, the
detergent may have already been released, and the appliance may have already drained the wash water. If this is the
case, the detergent dispenser must be refilled (see the section entitled ” Loading the Detergent ” ).
Press Start/Pause Button to pause the machine when the door is closed ,Press Program Button more than three
seconds the machine will be in stand by state , then you can change the program to the desired cycle setting (see the
section entitled ” Starting a wash cycle. . .” ).
NOTE: If you open the door during washing, the machine will pause. When you close the door and press the
Start/Pause Button, the machine will keep on working after 10 seconds.
The program lights show the state of the dishwasher:
One of the program lights on———-stand by or pause
One of the program lights blinking—– run

Candy CDCP 6 Specifications

General

Door color	White
Door hinge	Standard
Product size	Compact
Built-in display	Yes
Custom panel-ready	-
Appliance placement	Freestanding
Cutlery compartment colour	Metallic grey
Upper basket adjustable height	No
Current	6 A
Power plug type	Type F (CEE 7/4)
AC input voltage	230 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Power consumption (off)	0.45 W
Water consumption per cycle	6.5 L
Energy consumption per cycle	0.61 kWh
Package depth	605 mm
Package width	555 mm
Package weight	24000 g
Cycle time	230 min
Noise level	51 dB
Drying system	Condensation
Delay start (max)	8 h
Number of place settings	6 place settings
Number of washing programs	6
Maximum hot water supply temperature	60 °C
Drying class	A
Annual energy consumption	174 kWh

Weight and Dimensions

Depth	500 mm
Width	550 mm
Height	438 mm
Weight	20600 g