The spray arms can be easily removed for periodic cleaning of the nozzles to prevent possible clogging. Wash them
under running water and carefully replace them in their seats, checking that their rotary movement is in no way
impeded.
Grasp the middle of the spray arm, pull it upwards to remove it. Wash the arms under a jet of running water and
replace it carefully to its seat. After reassembly, check that the spray arms rotate freely. Otherwise, check that they
have been installed correctly.
How to Keep Your Dishwasher in Shape
After Every Wash: After every wash, turn off the water supply to the appliance and leave the door slightly open
so that moisture and odors are not trapped inside.
Remove the Plug: Before cleaning or performing maintenance, always remove the plug from the socket.
No Solvents or Abrasive Cleaning: To clean the exterior and rubber parts of the dishwasher, do not use
solvents or abrasive cleaning products. Only use a cloth with warm soapy water. To remove spots or stains
from the surface of the interior, use a cloth dampened with water with a little vinegar, or a cleaning product
made specifically for dishwashers.
When not in use for a long time: It is recommend that you run a wash cycle with the
dishwasher empty and then remove the plug from the socket, turn off the water supply and leave the door of the
appliance slightly open. This will help the door seals to last longer and prevent odours from forming within the
appliance.
Moving the Appliance: If the appliance must be moved, try to keep it in the vertical position. If absolutely
necessary, it can be positioned on its back.
Seals: One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this from occurring.
8. Installation instruction
Attention: The installation of the pipes and electrical equipments should be done by qualified professionals.