Candy CDCP 6 User Manual

Warning
Electrical Shock Hazard Disconnect electrical power before installing dishwasher.
Failure to do so can result in death or electrical shock.
Installation preparation
The installation position of dishwasher should be near the existing water inlet tap and drain outlet and power socket.
One side of the cabinet sink should be chosen to facilitate the connection of drain hoses of the dishwasher.
Positioning the Appliance
Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along
the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned
to the right or the left to facilitate proper installation.
About Power Connection
WARNING!
For personal safety:
Do not use an extension cord or an adapter plug with this appliance.
Do not, under any circumstances, cut or remove the earthing
Connection from the power cord.
Electrical Requirements
Please look at the rating label to know the rating voltage and connect the dishwasher to the appropriate power
supply. Use the required fuse 10 amp, time delay fuse or circuit breaker recommended and provide separate circuit
serving only this appliance.
Insure proper ground exists before use
Electrical Connection
Ensure the voltage and frequency of the power being corresponds to those on the rating plate. Only insert the plug
into an electrical socket which is earthed properly. If the electrical socket to which the appliance must be connected
is not appropriate for the plug , replace the socket, rather than using a adaptors or the like as they could cause
overheating and burns.
Water Connection
Cold Water Connection
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that it is
fastened tightly in place. If the water pipes are new or have not been used for an extended period of time, let the
water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that

Candy CDCP 6 Specifications

General

Door color	White
Door hinge	Standard
Product size	Compact
Built-in display	Yes
Custom panel-ready	-
Appliance placement	Freestanding
Cutlery compartment colour	Metallic grey
Upper basket adjustable height	No
Current	6 A
Power plug type	Type F (CEE 7/4)
AC input voltage	230 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Power consumption (off)	0.45 W
Water consumption per cycle	6.5 L
Energy consumption per cycle	0.61 kWh
Package depth	605 mm
Package width	555 mm
Package weight	24000 g
Cycle time	230 min
Noise level	51 dB
Drying system	Condensation
Delay start (max)	8 h
Number of place settings	6 place settings
Number of washing programs	6
Maximum hot water supply temperature	60 °C
Drying class	A
Annual energy consumption	174 kWh

Weight and Dimensions

Depth	500 mm
Width	550 mm
Height	438 mm
Weight	20600 g