Filter assembly
The filter efficiently removes food particles from the wash water, allowing it to be recycled during the cycle. For best
performance and results, the filter assembly must be cleaned regularly. For this reason, it is a good idea to remove
the larger food particles trapping in the filter after each wash cycle by rinsing the filter and cup under running water.
To remove the filter assembly, pull the cup handle in the upward direction.
WARNING!
Never run the dishwasher without the filters in place.
The dishwasher must never be used without the filters.
Improper replacement of the filter may reduce the performance level of the appliance and damage dishes and
utensils.
NOTE: If do it from step1 to step 3, the filter system will be removed; while if do it from Step 3 to Step 1, the
filter system will be installed.
Notes:
To Next Page
Loading...
