When you have finished cooking
1. Touching the heating zone selection
control that you wish to switch off.
2. Turn the cooking zone off by scrolling down to “ 0 “ or touching “-“ and
”+” control together.
3. Turn the whole cooktop off by touching the ON/OFF control.
4. Beware of hot surfaces
“H” will show which cooking zone is hot to touch. It will disappear when the surface has cooled down to a safe
temperature. It can also be used as an energy saving function if you want to heat further pans, use the hotplate that is
still hot.
Locking the Controls
• You can lock the controls to prevent unintended use (for example children accidentally turning the cooking zones on).
• When the controls are locked, all the controls except the ON/OFF control are disabled.
To lock the controls
Touch the keylock control. The timer indicator will show “ Lo “
To unlock the controls
1. Touch and hold the keylock control for a while.
2. You can now start using your ceramic hob.
When the hob is in the lock mode, all the controls are disable except the ON/OFF, you can always turn the ceramic hob off with
the ON/OFF control in an emergency, but you shall unlock the hob first in the next operation.
Over-Temperature Protection
A temperature sensor equipped can monitor the temperature inside the ceramic hob. When an excessive temperature is
monitored, the ceramic hob will stop operation automatically.
To Next Page
Loading...
