Why Candy CS 1482DE/1-S Washer does not start?
If your Candy Washer doesn't start, ensure it's plugged into a working socket and that the power is on. Verify the wall socket is functional by testing it with another appliance. Also, check that the door is correctly closed, the program is correctly selected, the start button is pressed, and that the washer isn't in pause or time delay mode.
What to do if Candy Washer does not spin?
If your Candy Washer isn't spinning, remove the load, de-tangle it, reload it, and restart the spin program. Wait a few minutes, check the selected options and their effect on the spin cycle, and ensure you're using the correct amount of detergent.
What to do if water leaked from Candy CS 1482DE/1-S Washer?
If you see water on the floor near your Candy Washer, it could be due to a leak from the seal between the tap, supply hose, and fill valve. Try replacing the seal and tightening the hose connections. Also, make sure the front filter is correctly closed.
Why Candy CS 1482DE/1-S makes noises during the spin cycle?
If your Candy Washer is making strong vibrations or noises during the spin cycle, adjust the feet as indicated in the specific section. Also, make sure the transport screws, rubber bungs, and spacer tubes were removed. Check the drum for any foreign objects like coins, hinges, or buttons.
How to fix E3 error on Candy CS 1482DE/1-S Washer?
If your Candy Washer displays E3 or 3 flashes of the LEDs, check that the filter is not clogged or that there are no foreign bodies inside the filter compartment. Make sure the drain hose isn’t bent, kinked, or trapped. Also, ensure the home drainage system is not blocked.
How to fix E2 error on Candy CS 1482DE/1-S Washer?
If your Candy Washer displays E2 or 2 flashes of the LEDs, ensure the water supply tap is open and the supply hose isn’t bent, kinked, or trapped. Check that the drain pipe is at the proper height. Close the water supply tap, unscrew the filler hose, and ensure the anti-sand filter is clean. Also, check that the filter isn't clogged and there are no foreign bodies obstructing water flow.
What to do if Candy Washer displays E7 error?
If your Candy Washer displays E7 or 7 flashes of the LEDs, make sure the door is correctly closed and that clothes inside the drum are not preventing it from closing fully. If the door is locked, turn off and unplug the washing machine, wait 2-3 minutes, and reopen the door.
Why Candy CS 1482DE/1-S displays E4 error?
If your Candy Washer displays E4 or 4 flashes of the LEDs, ensure you are using the correct amount of detergent and that it is designed for use in a washing machine.
General| Washing Capacity | 8 kg |
|---|---|
| Spin Speed | 1400 rpm |
| Energy Efficiency Class | A+++ |
| Dimensions (H x W x D) | 85 x 60 x 53 cm |
| Number of Programs | 16 |
| Loading type | Front Loading |
| Colour | White |
| Programs | Cotton, Synthetic, Delicate, Wool, Quick |
To Next Page
