Candy CSO 1285TE-S - User Manual

Questions and Answers

T
Timothy JacksonAug 12, 2025
Why my Candy CSO 1285TE-S does not work or start?
- J
  Joshua MartinAug 12, 2025
  If your Candy Washer isn't starting, here are a few things to check: * Ensure the washer is plugged into a working electrical outlet. * Verify that the power is on. * Test the wall socket with another appliance. * Make sure the door is completely closed. * Confirm that you've selected the correct program and pressed the start button. * Check that the washing machine is not in pause or time delay mode.
M
Miranda GarciaAug 15, 2025
What to do if my Candy CSO 1285TE-S does not drain water?
- J
  Jesus TaylorAug 15, 2025
  If your Candy Washer isn't draining water, try these steps: * Check the filter for clogs or foreign objects. * Make sure the drain hose isn’t bent, kinked, or trapped. * Ensure your home drainage system isn't blocked by trying to drain the water in the sink.
L
lovekarenAug 20, 2025
How to unlock the door of my Candy Washer?
- J
  Jennifer MurphyAug 20, 2025
  If you're having trouble with the door on your Candy Washer: * Ensure the door is correctly closed and that no clothes are preventing it from closing fully. * If the door is locked, turn off and unplug the washing machine, wait 2-3 minutes, and then try reopening the door.
A
Amanda StaffordAug 23, 2025
Why my Candy CSO 1285TE-S is not spinning?
- K
  Keith BarnettAug 23, 2025
  If your Candy Washer isn't spinning: * Remove and de-tangle the load, then reload it and restart the spin program. * Wait a few minutes to allow water to drain completely. * Ensure the "no spin" function is not selected (if applicable). * Check selected options and their impact on the spin cycle. * Make sure you're using the correct amount of detergent, as excessive detergent can impede the spin cycle.
G
guerranicoleAug 27, 2025
Why is my Candy CSO 1285TE-S leaking water?
- D
  Dr. Stephen HicksAug 27, 2025
  If you notice water leaking on the floor near your Candy Washer: * Check the seal between the tap, supply hose, and fill valve for leaks; replace if necessary and tighten hose connections. * Make sure the front filter is correctly closed.
J
Jennifer YoungAug 31, 2025
How to fix Candy CSO 1285TE-S Washer that cannot load water?
- M
  Mrs. Brittany JuarezAug 31, 2025
  If your Candy Washer isn't loading water, try the following: * Make sure the water supply tap is fully open. * Check that the water supply hose isn’t bent, kinked, or trapped. * Ensure the drain pipe is at the correct height. * Close the water supply tap, unscrew the filler hose, and clean the anti-sand filter. * Inspect the filter for clogs or foreign objects.
W
Wendy FloresSep 3, 2025
How to stop Candy CSO 1285TE-S Washer from vibrating so much?
- M
  Miss Tammy WaltersSep 3, 2025
  If you're experiencing strong vibrations or noises during the spin cycle of your Candy Washer: * Check if the washing machine is fully leveled and adjust the feet if necessary. * Ensure that transport screws, rubber bungs, and spacer tubes were removed during installation. * Inspect the drum for any foreign objects like coins, hinges, or buttons.
E
ericaandersonSep 7, 2025
What to do if there is too much foam in my Candy CSO 1285TE-S Washer?
- M
  Mary PadillaSep 7, 2025
  If there is too much foam or water in your Candy Washer, make sure you are using the correct amount of detergent and that the detergent is designed for use in a washing machine.

Candy CSO 1285TE-S Specifications

General

Type	Freestanding
Appliance placement	Freestanding
Loading type	Front load
Colour of product	White
Built-in display	Yes
Door hinge	Left
Drum material	Stainless steel
Rated capacity	8 kg
Maximum spin speed	1200 RPM
Spin-drying class	B
Washing class	A
Number of washing programs	16
Delayed start timer	Yes
Delay start (max)	24 h
Energy efficiency class	A+++
Width	600 mm
Height	850 mm
Quick Wash Program	Yes
Delay Start	Yes
Child Lock	Yes
Programs	Delicate/silk, Quick, Synthetics, Wool
Dimensions (HxWxD)	850 x 600 x 530 mm
Depth	530 mm