Candy CSO 14105TE/1-S

Questions and Answers

K
Kathryn StaffordAug 13, 2025
Why my Candy CSO 14105TE/1-S Washer does not start?
- A
  Andrea FriedmanAug 13, 2025
  To resolve the issue of your Candy Washer not starting, please ensure that it is properly plugged into a working electrical outlet and that the power is switched on. Verify the wall socket's functionality by testing it with another device, such as a lamp. Also, check that the door is correctly closed and that you have selected the appropriate program and pressed the start button. Finally, confirm that the washer is not in pause or time delay mode.
Z
Zachary CoxAug 16, 2025
What to do if Candy CSO 14105TE/1-S Washer does not spin?
- B
  Brittney DominguezAug 17, 2025
  If your Candy Washer isn't spinning, it might be due to an unbalanced load. Remove the clothes, untangle them, reload them evenly, and then restart the spin program. Also, check if the 'no spin' function is activated on some models, and review your selected options to see if they're affecting the spin cycle. Ensure you're using the correct amount of detergent, as excessive detergent can also hinder the spin cycle. If water hasn't completely drained, wait a few minutes; if the issue continues, refer to the Error 3 section.
K
Kevin RitterAug 21, 2025
Why is my Candy CSO 14105TE/1-S leaking water?
- C
  Cassidy LangAug 21, 2025
  If you find water leaking on the floor near your Candy Washer, it could be due to a leak from the seal between the tap, supply hose, and fill valve. In this case, replace the seal and tighten the hose connections securely. Also, ensure that the front filter is properly closed.
S
Sydney RobertsAug 25, 2025
How to reduce vibrations during spin cycle of Candy CSO 14105TE/1-S?
- B
  bishopashleyAug 25, 2025
  Loud vibrations or noises during the spin cycle of your Candy Washer can occur if the appliance isn't level. Adjust the feet as detailed in the relevant section to ensure it stands evenly. Also, confirm that all transport screws, rubber bungs, and spacer tubes have been removed. Lastly, check the drum for any foreign objects like coins, hinges, or buttons.
C
Christina ThompsonAug 28, 2025
What does E3 error mean on Candy CSO 14105TE/1-S?
- J
  Joseph CortezAug 28, 2025
  The E3 error (or 3 LED flashes) on your Candy Washer suggests a drainage problem. Check that the filter is not clogged and that there are no foreign objects obstructing water flow inside the filter compartment. Ensure that the drain hose is not bent, kinked, or trapped. Also, verify that your home drainage system isn't blocked, allowing water to flow freely; try draining water in the sink to check.
P
Philip RaySep 1, 2025
How to fix E2 error on Candy CSO 14105TE/1-S Washer?
- L
  leslie22Sep 1, 2025
  The E2 error (or 2 LED flashes) on your Candy Washer indicates a water supply issue. Ensure the water supply tap is fully open and that the supply hose isn't bent, kinked, or trapped. Also, verify the drain pipe is at the correct height as specified in the installation section. Close the water supply tap, detach the filler hose from the machine's back, and inspect the “anti-sand” filter for blockages. Finally, check the filter for clogs or foreign objects that may be obstructing water flow.
C
Carmen SmithSep 4, 2025
What to do if Candy CSO 14105TE/1-S Washer shows E7 error?
- D
  Deborah BushSep 4, 2025
  The E7 error (or 7 LED flashes) on your Candy Washer indicates a door issue. Make sure the door is fully and correctly closed, ensuring that no clothing inside the drum is preventing it from closing completely. If the door remains locked, switch off and unplug the washing machine from the power socket, wait for 2-3 minutes, and then try reopening the door.
R
Ronald FarrellSep 8, 2025
Why does my Candy Washer show E4 error?
- Z
  zimmermanpatrickSep 8, 2025
  The E4 error (or 4 LED flashes) on your Candy Washer may indicate an issue with detergent usage. Make sure you are using the correct amount of detergent and that the detergent is specifically designed for use in washing machines.