Why Candy CSWS485TWMCE/1-S Washer does not start?
If your Candy Washer isn't starting, ensure it's properly plugged into a working power socket and that the power is on. Test the wall socket with another appliance. Also, make sure the door is completely closed, the correct program is selected, and the start button is pressed. Verify that the washer isn't in pause or time delay mode.
What to do if Candy Washer does not spin?
If your Candy Washer isn't spinning, it might be due to an unbalanced load. Remove the load, detangle it, reload it, and restart the spin program. Also, water may not have completely drained, so wait a few minutes. Refer to Error 3 section if the problem continues. Some models might have a 'no spin' function selected, or excessive detergent could be impeding the spin cycle, so ensure the correct amount is used. Check the selected options and their effect on the spin cycle.
Why is water leaking from my Candy Washer?
If you see water leaking near your Candy Washer, it could be from the seal between the tap, supply hose, and fill valve. Replace the seal and tighten the hose connections correctly. Also, ensure the front filter is correctly closed.
How to unlock Candy Washer door?
If your Candy Washer displays error code E7 or the LEDs flash seven times, there may be a door problem. Ensure the door is correctly closed and that no clothes are preventing it from closing fully. If the door is locked, turn off and unplug the washing machine, wait 2-3 minutes, and then reopen the door.
How to fix Candy CSWS485TWMCE/1-S Washer error E2?
If your Candy Washer displays error code E2 or the LEDs flash twice, it means the machine isn't loading water. Check that the water supply tap is fully open and that the water supply hose isn’t bent, kinked, or trapped. Ensure the drain pipe is at the correct height as per the installation section. Close the water supply tap, unscrew the filler hose, and clean the anti-sand filter. Also, inspect the filter compartment for clogs or foreign objects.
What to do if Candy Washer shows E3 error?
If your Candy Washer displays error code E3 or the LEDs flash three times, it means the washing machine isn't draining water. Check that the filter isn't clogged and that there are no foreign objects in the filter compartment. Make sure the drain hose isn’t bent, kinked, or trapped. Also, ensure the home drainage system isn't blocked by trying to drain the water in the sink.
Why is my Candy Washer vibrating so much?
If your Candy Washer is making strong vibrations or noises during the spin cycle, it might not be fully leveled. Adjust the feet as shown in the manual. Also, ensure that the transport screws, rubber bungs, and spacer tubes were removed during installation. Check the drum for any foreign objects like coins, hinges, or buttons.
What does E4 error mean on Candy Washer?
If your Candy Washer displays error code E4 or the LEDs flash four times, there is likely too much foam and/or water. Make sure you're using the correct amount of detergent and that the detergent is designed for use in a washing machine.
General| Drum capacity | 5 kg |
|---|---|
| Wi-Fi controlled | No |
| Delay start (max) | 24 h |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 77 dB |
| Noise level (wash) | 51 dB |
| Delayed start timer | Yes |
| Adjustable spin speed | - |
| Control type | Touch |
| Loading type | Front-load |
| Product color | White |
| Appliance placement | Built-in |
| Energy efficiency scale | A to G |
| Energy consumption washing per cycle | 1.2 kWh |
Weight and Dimensions| Depth | 530 mm |
|---|---|
| Width | 600 mm |
| Height | - mm |
| Weight | 63000 g |
| Package weight | 65000 g |
Read manual, report damage, WEEE disposal, and general usage guidelines.
Guidelines for child supervision and safe operation around children.
Warnings about drying specific materials and fire hazards from oil-affected items.
Ensures safe electrical connections, proper water pressure, and hose usage.
Steps to remove transportation screws and related parts for installation.
Keep packaging materials away from children.
Instructions for placing the protective plastic sheet during installation.
Connecting the water hose to the supply tap using the provided hose.
Explanation of safety features for water supply tubes.
Proper routing and height for the drain hose to prevent siphoning.
Step-by-step guide to level the appliance using adjustable feet.
Advice to contact service for power cord replacement and warranty exclusion.
Details on the three compartments for detergent and additives.
Instructions for using the liquid detergent cup for timed dispensing.
Warnings regarding liquid products and specific detergent types.
Advice on sorting laundry, handling specific items, and general washing practices.
Tips to reduce energy and water consumption during washing cycles.
Guidance on selecting, dosing, and using detergents and softeners correctly.
Guidance on selecting detergents and understanding the environmental effects.
Instructions for cleaning the appliance's external surfaces safely.
Detailed steps for cleaning the detergent drawer, including for auto-dosing systems.
Procedure for cleaning the pump filter to prevent blockages.
Steps for draining and preparing the machine for moving or long periods of disuse.
How to select a program, adjust settings, and start the wash cycle.
Options for initiating the drying cycle automatically after washing.
Indicators for program completion and safe door opening procedures.
Key technical data including water pressure and power requirements.
How to start, pause, and resume wash cycles using the START/PAUSE button.
Procedures for cancelling cycles and setting a delayed start.
How to select drying programs, degrees of dryness, and steam functions.
Details on steam treatments and the rapid program options.
How to use Stain Level, Pre-wash, Aquaplus, and Hygiene+ features.
How to adjust temperature, spin speed, and activate/deactivate the key lock.
Explains the meaning of various indicators on the digital display.
Details on Kg Detector function and drying selection indicators.
Introduction to the Smart Touch feature and the Candy simply-Fi mobile application.
Overview of app features like Voice Assistant, Cycles, Smart Care, and My Statistics.
Step-by-step guide for initial setup and registration of the appliance with the app.
Instructions for daily use of the Smart Touch feature via the mobile app.
Tips for ensuring a stable NFC connection and avoiding interference.
Comprehensive table detailing wash programs, load capacity, and temperatures.
Information on customizing settings via the app and default Auto-Clean program.
Important notes and clarifications regarding program selection and load limits.
Standard program settings for testing according to EU directives.
Descriptions of various washing programs like Cottons, ECO, Synthetics, etc.
Details on Easy Iron and Rapid programs for crease reduction and time saving.
Descriptions for Mixed & Coloured, Perfect Cotton, and Special 49' programs.
Details on drying programs (Wool, Low/High Heat) and the Smart Touch Auto-Clean cycle.
General advice on drying, sorting laundry, and identifying drying care symbols.
Steps for selecting drying programs and choosing desired dryness levels (Extra Dry, Iron Dry, Cupboard Dry).
Instructions for timed drying and limitations of the wool drying program.
How to cancel drying, warnings about the cool down phase, and avoiding interruptions.
Comprehensive steps for running combined wash and dry cycles.
Details on selecting drying levels, wool program limits, and cancelling the drying cycle.
How to use the app for diagnosing and resolving machine errors.
Lists common error codes and their possible causes and practical solutions.
Solutions for common issues like the machine not starting, water leaks, or spin problems.
Addressing vibrations, noises, spare parts, and warranty coverage.
Explanation of the CE mark and manufacturer disclaimers regarding printing errors.
To Next Page