Note:Figure 1, Figure 2 only as a product space demand
size schematic diagram.
Leveling the Fridge/Freezer
If the Fridge/Freezer is not
level, the door and
magnetic seal alignment
will be affected and may
cause you Fridge/Freezer
to work incorrectly. Once
the Fridge/Freezer is
placed in its final location,
adjust the leveling feet at
the front by turning them
Cleaning before use
Wipe the inside of the Freezer with a weak solution of
bicarbonate of soda. Then rinse with warm water using a
damp sponge or cloth. Wash the baskets and shelves in
warm soapy water and dry completely before replacing in
the Freezer. The external parts of the Freezer can be
cleaned with wax polish.
Before switching on!
DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING
THE FREEZER.
The coolant fluid needs time to settle. If the appliance is
switched off at any time, wait 30 minutes before switching
back on to allow the coolant fluid to settle.
Before filling your Freezer
Before storing foods in your Freezer, turn the Freezer on
and wait for 24 hours, to make sure it is working properly
and to allow the Freezer to fail to the correct temperature.
INTRODUCTION
General Description of Refrigerator