Candy RapidO PRO RP4 476BWMUC-S User Manual

144 pages

Questions and Answers:

S
Shawn CarsonAug 3, 2025
Why Candy Washer does not spin?
- W
  William WilliamsAug 4, 2025
  If your Candy Washer isn't spinning, first ensure the load is balanced by removing, detangling, and reloading the clothes before restarting the spin program. Also, check that water has been completely drained. If the problem persists, refer to the Error 3 section. Ensure that the 'no spin' function isn't selected and check the selected options' effect on the spin cycle. Excessive detergent can also impede spinning, so use the correct amount.
J
Jacob KingAug 7, 2025
What to do if water leaked on the floor near the Candy RapidO PRO RP4 476BWMUC-S Washer?
- R
  rebecca10Aug 7, 2025
  If you see water leaking on the floor near your Candy Washer, ensure that the front filter is correctly closed. The leak might be from the seal between the tap, supply hose, and fill valve; if so, replace the seal and tighten the hose connections properly.
T
Tracy BrooksAug 11, 2025
How to fix E2 error on Candy RapidO PRO RP4 476BWMUC-S?
- C
  Christine LloydAug 12, 2025
  If your Candy Washer displays error code E2 or the LEDs flash twice, it indicates that the machine cannot load water. First, ensure the water supply tap is fully open and that the water supply hose isn’t bent, kinked, or trapped. Also, make sure the drain pipe is at the proper height (see installation section). Close the water supply tap, unscrew the filler hose, and check that the anti-sand filter is clean and not blocked. Finally, check that the filter is not clogged and that there are no foreign objects inside the filter compartment.
A
Alexander RobertsAug 16, 2025
What to do if Candy Washer shows E3 error?
- B
  Brandy Martin MDAug 16, 2025
  If your Candy Washer displays error code E3 or the LEDs flash three times, it means the washing machine isn't draining water. Check that the filter isn't clogged or that there are no foreign objects inside the filter compartment. Also, ensure the drain hose isn’t bent, kinked, or trapped. Finally, make sure the home drainage system is not blocked.
J
Janet EdwardsAug 20, 2025
How to fix E7 error on Candy RapidO PRO RP4 476BWMUC-S Washer?
- A
  Alyssa VegaAug 20, 2025
  If your Candy Washer displays error code E7 or the LEDs flash seven times, it indicates a door problem. Ensure the door is correctly closed and that no clothes inside the drum are preventing it from closing fully. If the door is locked, turn off and unplug the washing machine, wait 2-3 minutes, and then reopen the door.
K
Kelly DunnAug 26, 2025
Why Candy Washer showing E4 error?
- S
  shanebassAug 26, 2025
  If you receive an E4 error or see 4 flashes of the LEDs on your Candy Washer, it indicates too much foam and/or water. Make sure you are using the correct amount of detergent, and that the detergent is designed for use in a washing machine.
W
wgardnerAug 29, 2025
Why Candy RapidO PRO RP4 476BWMUC-S vibrates so much?
- N
  nfitzpatrickAug 29, 2025
  Strong vibrations or noises during the spin cycle of your Candy Washer can occur if the washing machine isn't fully leveled. Adjust the feet as indicated in the specific section. Also, ensure that transport screws, rubber bungs, and spacer tubes were removed and that there are no foreign objects inside the drum (coins, hinges, buttons, etc.).

Candy RapidO PRO RP4 476BWMUC-S Specifications

General

Type	Freestanding
Colour	White
Built-in display	Yes
Control type	Rotary, Touch
Door colour	Black
Drum material	Stainless Steel
Inverter technology	Yes
Drum volume	58 L
Rated capacity	7 kg
Maximum spin speed	1400 RPM
Spin-drying class	B
Washing class	A
Noise emission class	A
Delayed start timer	Yes
Delayed start	24 h
Wi-Fi controlled	Yes
Near Field Communication (NFC)	Yes
Energy efficiency class	A
Energy consumption per 100 cycles	45 kWh
Width	60 cm
Height	85 cm
Noise Level (Washing)	51 dB
Model	RP4 476BWMUC-S
Loading type	Front-loading
Dimensions (H x W x D)	850 x 600 x 530 mm

Summary

General Safety Rules

Electrical Connections and Safety Instructions

Guidance on connecting the appliance safely and electrical safety precautions.

Installation

Hydraulic Connections

Instructions for connecting the water supply hose and ensuring proper water flow.

Appliance Setting and Levelling

Steps for positioning, levelling, and plugging in the washing machine.

Detergent Drawer

Practical Hints

Load Tips and Washing Advice

Tips for sorting laundry, maximizing load size, and using wash programs efficiently.

Saving Energy and Water

Guidance on efficient appliance usage to save money and protect the environment.

Detergent Dosing Guidance

Advice on selecting and using the correct amount of detergent and additives.

Cleaning and Maintenance

Exterior and Drawer Cleaning

Instructions for cleaning the washing machine's exterior and the detergent drawer.

Pump Filter Cleaning

Procedure for regularly cleaning the pump filter to maintain draining system efficiency.

Moving and Storage Advice

Recommendations for moving the appliance or storing it for prolonged periods.

Porthole Emergency Opening

Remote Control (Wi-Fi)

Quick User Guide

Controls and Programmes

Technical Data and Control Panel Overview

Key technical specifications and an overview of the washing machine's control panel.

Programme Selection and Operation

How to select programmes using the SMART RING and operate cycles with PLAY/PAUSE.

Cycle Management and Options

Managing cycles (pause, cancel, delay start) and using additional options.

Special Programmes and Settings

Details on special programmes, temperature, spin, and drum cleaning.

Advanced Customization and Safety

Customizing wash intensity, alternative programmes, and child lock.

Display Indicators

Explanation of the digital display and various indicator lights on the control panel.

Wi-Fi Connection Indicators

Understanding the status indicators for the Wi-Fi connection.

Washing Programme Table

Detailed table outlining all available wash programmes, their settings, and capacities.

Important Usage Notes

Key notes on usage, including information for test laboratories and eco programmes.

Programme Descriptions

Detailed explanations of each wash programme, their features, and recommended uses.

Troubleshooting and Warranty

Error Code Format and Solutions

Explanation of error codes and practical solutions for common machine issues.

Troubleshooting Other Anomalies

Solutions for common problems like machine not starting, leaks, or unusual vibrations.

Warranty Information and Manufacturer Liability

Details on product warranty, spare parts, and manufacturer responsibilities.

Related product manuals

Candy RP4 476BWMR/1-S

Candy RO H8A2TCEX-S

Preview: Candy ROE H9A2TCEX-S

Candy ROE H9A2TCEX-S

Candy ROE H8A2TCEX-S

Candy RP 4106BWMR/1-S

Candy RP586BWMBCB/1-S

Candy RP 4146BWMBC/1-S

Candy RO4 476DWMC7/1-S

Candy RO 1496DWMCT/1-S

Candy RP 4116BWMBC/1-S

Candy RP 496BWMBCB/1-S

Candy RO 1486DWMCT/1-S