Cannondale Jekyll - Specifications; Tightening Torques

13
126560.PDF
Specications
Frame Types BallisTec Carbon or SmartFormed Alloy
Headtube Integrated Si
Chainline 50 mm
BB Shell Width BB30 73 mm
Rear Travel Modes (remote lever selectable)
FLOW - 90 mm
ELEVATE - 150 mm
Rear Shock FOX DYAD RT2 Pull Shock
Seat Post Diameter
Use a seat post with a 31.6 mm diameter only.
Do not use other size seatposts. Do not use a seat post with a shim or
adapter. Use carbon gel KF115/ when installing a seat post.
Front Derailleur S3 Direct Mount, Bottom pull
Dropout Spacing 142mm (convertible to 135mm)
Rear Brake Post Mount Adapters - 160/180/185/203
WARNING
Please read your Cannondale Bicycle Owner’s Manual for more information on the following specications:
Intended Use ASTM Condition 4, All-Mountain OverMountain
Maximum Tire Width 2.5”
Maximum Fork Length 545 mm
Minimum Seat Post Insert 100 mm
Tightening Torques
Correct tightening torque for the fasteners (bolts, screws, nuts) on your bicycle is very important to your safety.the durability and
performance of your bicycle. We urge you to have your Dealer correctly torque all fasteners using a torque wrench. If you decide to
tighten fasteners yourself always use a good torque wrench!
DESCRIPTION Nm In Lbs Loctite™
Rear Brake Adapter (Maximum) 10.0 88.5
242 (blue)
Shock Mounting Bolts 8.0 71.0
Dropout Pivot Axle Bolts 7.0 62.0
Shock Link Pinch Bolts
5.0 44.0
Main Pivot Pinch Bolts
BB Cable Exit Guide Screws
2.5 22.0
Rear Derailleur Hangar Screws
Housing Guides (Maximum) 3.0 26.5