To Next PageTo Next PageWhat to do if Canon 300II won't start after pressing the start key?
If your Canon Scanner does not start scanning after pressing the start key, ensure that the computer is switched on and has started correctly. If a User Call Error is displayed, consult the error table. If a Service Call Error appears, also refer to the corresponding table.
What to do if my Canon 300II Scanner image is out of focus?
If your Canon Scanner image is out of focus, rotate the focus fin on the lens to adjust the focus. Also, check that the lens and the carrier are installed correctly. Ensure that the lens and lamp are clean; if necessary, clean them.
Why does my Canon 300II Scanner show splices on the image after scanning?
If your Canon Scanner displays splices on the image after several scans, this may be due to your computer's performance. Consider upgrading your computer to improve its performance. It can also happen if your computer's system resources or working memory are insufficient. Try closing all applications and restarting your computer. If you are using MS300II, it is especially recommended to close all other applications.
How to fix a Canon Scanner when the screen won't turn on?
If the screen of your Canon Scanner does not turn on, first ensure that the lamp unit is correctly fitted into the main unit. Also, check if the lamp has burned out. If “LP” appears on the Error/User Mode display, it indicates a burned-out lamp, and you will need to replace it with a new one.
How to fix uneven or dark screen brightness on a Canon 300II?
If your Canon Scanner's screen brightness is uneven or too dark, check if the lens is clean and securely installed. Also, make sure the lamp and lamp unit are securely installed. Verify that the Light Adjustment dial is correctly set for the installed lens type.
Explains symbols and notations for efficient, trouble-free, and safe operation.
Guidelines for safe operation, ventilation, and choosing a proper location.
Proper power connection, cord management, and safe handling practices.
Warnings and cautions for safe daily operation and environmental considerations.
Highlights scanner features and describes Scanner, DMP, and Reader-Printer modes.
Lists package contents and details available optional items like carriers and lenses.
Identifies main scanner parts and explains the function of each control panel key.
Details different film carriers and lenses, including installation and switching.
Outlines computer requirements and SCSI/USB connection procedures.
Step-by-step instructions for turning the scanner and computer on and off.
Details how Windows recognizes the scanner and guides driver installation.
Guides on installing ISIS/TWAIN drivers and CapturePerfect scanning application.
Instructions for starting, closing, and operating CapturePerfect and Reader-Printer mode.
Steps to remove ISIS/TWAIN driver and CapturePerfect from the system.
Covers loading film, adjusting image, rotating, and focusing.
Explains film polarity selection and automatic/manual brightness adjustments.
Instructions for defining scan areas, removing borders, and printing in DMP mode.
How to change settings for power saver, hi-speed scanning, resolution, cleaning, and operation modes.
Details configurations for power saving, hi-speed scanning, resolution, cleaning, and mode switching.
Step-by-step instructions and safety precautions for lamp replacement.
How to clean the scanner screen, casing, and lenses for optimal performance.
Procedure for cleaning the Fileprint 470 fixing rollers to resolve print issues.
Lists common issues, user call errors, and service call error handling.
General