228 CHAPTER 7 The Stereo Data Maker (SDM)
end_time h,m
finish_time h,m
Specifies a time of day when an operation should end. Must be specified before
sleep_until or start_time. Currently, only the command time_lapse supports this
feature.
sleep_until h,m
start_time h,m
The camera waits until the specified time of day (h = hours, m = minutes). During that
time the screen is darkened.
time_lapse a, b, c, d, e, f, g, h, i, j, k, l, m, n, p, q, r, s, t, u
Starts a time-lapse series. This command is the core of the time-lapse script con-
tained in the SDM distribution. Here, it can be called as a command from another
script.
Parameters:
a First delay minutes
b First delay seconds
c Shoot interval minutes
d Shoot interval seconds
e Number of repeats
f 1 = endless mode (e ignored), 0 = limited by parameter e
g 0 = single, 1 = continuous, 2 = custom timer, 3 = burst
h Number of exposures for Tv bracketing
i Number of exposures for focus bracketing
j 0 = Tv bracketing, 1 = focus bracketing, 2 = both
k 0 = lighten, 1 = darken, 2 = alternate
l Tv bracketing step in 1/3 EV
m 0 = equal step focus bracketing, 1 = autofocus bracketing, 2 = Digiscope bracket-
ing
n Focus step in mm.
p Digiscope focus distance
q 0 = don’t blank screen, 1 = blank screen
r 0 = don’t shutdown, 1 = automatic shutdown after required number of pictures,
2 = shutdown by USB signal
s 0 = don’t save bracketing stack, 1 = save bracketing stack
t 0 = no sunrise, 1 = sunrise mode. The Sunrise menu controls exposure and num-
ber of images when set to 1.
u 0 = use TXT format for sunrise log, 1 = use CSV format for sunrise log
To Next Page
Loading...
